STEINCONNECTOR product search

€0.00*
Categories
Filter
355 products found.
SERIES 126.V0
coupling, protected by twisting the locking nut, Article: NB390
Image similar to the original Article: NB390, Nominal Width|7.8 mm, Connection|LW9, Flow Rate|2,030 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW9, seal: NBR (Perbunan) One-hand coupling with automatic 5-point locking. Locking elements are balls which are locked by a spring-loaded unlocking sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve moves back to its original position and closes the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, hose connection, LW9, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: LW9 LW9 Flow Rate: 2,030 l/min 2,030
more Details
SERIES 161.VS
coupling, protected by twisting the locking nut, hexagonal, Article: O1AC0
Image similar to the original Article: O1AC0, Nominal Width|8.5 mm, Connection|LW9, Flow Rate|1,966 l/min
Nominal width 8.5 mm, material: steel, surface: zinc-plated, single shut off, connection type: ferrule, connection size: LW9, seal: NBR (Perbunan) Two-hand coupling with automatic 5-point locking. Locking elements are balls that are locked by a spring-loaded unlocking sleeve. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position closes the couling and pushes the plug out of the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. The positive connection between the coupling and the plug allows to transmitted torsional forces. Coupling body, sleeve and locking nut are made from steel zink plated. Valve brass. Spring and circlip AISI 301. Balls stainless steel AISI 420. Seals made from material NBR (Buna N). Plug: steel zink plated Nominal width 8.5 mm, steel, surface: zinc-plated, single shut off, ferrule, LW9, seal: NBR (Perbunan)
Nominal Width: 8.5 mm 8.5 Connection: LW9 LW9 Flow Rate: 1,966 l/min 1,966
more Details
SERIES 090.00
coupling, Article: N0GJ0
Image similar to the original Article: N0GJ0, Nominal Width|5 mm, Connection| 1/8, Flow Rate|600 l/min
Nominal width 5.0 mm, material: 1.4301, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: FPM (Viton) One-hand coupling with automatic 5-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling: back part, sleeve, coupler body and valve stainless steel AISI 304. Seal fluororubber FPM ( FDA comliant). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainleass steel AISI 304 Nominal width 5.0 mm, 1.4301, single shut off, male thread DIN228/1, 1/8, seal: FPM (Viton)
Nominal Width: 5 mm 5 Connection: 1/8 1/8 Flow Rate: 600 l/min 600
more Details
SERIES 126.V0
coupling, protected by twisting the locking nut, Article: NB700
Image similar to the original Article: NB700, Nominal Width|7.8 mm, Connection| 1/4, Flow Rate|2,030 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN2999 (BSPT), connection size: 1/4, seal: NBR (Perbunan) One-hand coupling with automatic 5-point locking. Locking elements are balls which are locked by a spring-loaded unlocking sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve moves back to its original position and closes the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, male thread DIN2999 (BSPT), 1/4, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/4 1/4 Flow Rate: 2,030 l/min 2,030
more Details
SERIES 161.VS
coupling, protected by twisting the locking nut, hexagonal, Article: O1AG0
Image similar to the original Article: O1AG0, Nominal Width|8.5 mm, Connection| 1/4, Flow Rate|1,966 l/min
Nominal width 8.5 mm, material: steel, surface: zinc-plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) Two-hand coupling with automatic 5-point locking. Locking elements are balls that are locked by a spring-loaded unlocking sleeve. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position closes the couling and pushes the plug out of the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. The positive connection between the coupling and the plug allows to transmitted torsional forces. Coupling body, sleeve and locking nut are made from steel zink plated. Valve brass. Spring and circlip AISI 301. Balls stainless steel AISI 420. Seals made from material NBR (Buna N). Plug: steel zink plated Nominal width 8.5 mm, steel, surface: zinc-plated, single shut off, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)
Nominal Width: 8.5 mm 8.5 Connection: 1/4 1/4 Flow Rate: 1,966 l/min 1,966
more Details
SERIES 125.F0
coupling, self venting safty coupling BiTec, Article: NB140
Image similar to the original Article: NB140, Nominal Width|7.8 mm, Connection| 1/4, Flow Rate|2,050 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN2999 (BSPT), connection size: 1/4, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic slide valve with two functions: 1. Establish flow while simultaneously securing the unlocking sleeve. 2. Shut off the flow while simultaneously venting and releasing the unlocking sleeve Coupled by pressing in the connector. Once this has audibly locked into place, the sliding sleeve can be used and the coupling can release the line pressure. Return the sliding sleeve to its starting position to switch the connector/hose connection to an unpressurised state. This will bleed any compressed air on the connector side. The connector can then be removed safely by pushing back the release sleeve. Material coupling: back part, sleeve and coupler body brass nickel plated. Sliding sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, male thread DIN2999 (BSPT), 1/4, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/4 1/4 Flow Rate: 2,050 l/min 2,050
more Details
SERIES 126.V0
coupling, protected by twisting the locking nut, Article: NB800
Image similar to the original Article: NB800, Nominal Width|7.8 mm, Connection| 1/4, Flow Rate|2,030 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) One-hand coupling with automatic 5-point locking. Locking elements are balls which are locked by a spring-loaded unlocking sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve moves back to its original position and closes the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/4 1/4 Flow Rate: 2,030 l/min 2,030
more Details
SERIES 100.B0
coupling, Basic, Article: N8840
Image similar to the original Article: N8840, Nominal Width|7.2 mm, Connection| 3/8, Flow Rate|875 l/min
Nominal width 7.2 mm, material: brass, single shut off, connection type: male thread DIN228/1, connection size: 3/8, seal: NBR (Perbunan) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Bolts stainless steel AISI 420. Material plug: brass Nominal width 7.2 mm, brass, single shut off, male thread DIN228/1, 3/8, seal: NBR (Perbunan)
Nominal Width: 7.2 mm 7.2 Connection: 3/8 3/8 Flow Rate: 875 l/min 875
more Details
SERIES 090.0A
coupling, octagonal, Article: N0GH0
Image similar to the original Article: N0GH0, Nominal Width|5 mm, Connection| 1/8, Flow Rate|600 l/min
Nominal width 5.0 mm, material: 1.4301, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: FPM (Viton) This one-hand coupling with automatic 5-point ball locking system with spring-loaded release sleeve. This system is used in the food industry where a mixing up of medias has to be ruled out. Achieved this is done through a coding. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Seals are FDA compliant. Material coupling: back part, sleeve, coupler body and valve stainless steel AISI 304. Seal fluororubber FPM ( FDA comliant). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainleass steel AISI 304 Nominal width 5.0 mm, 1.4301, single shut off, male thread DIN228/1, 1/8, seal: FPM (Viton)
Nominal Width: 5 mm 5 Connection: 1/8 1/8 Flow Rate: 600 l/min 600
more Details
SERIES 090.0S
coupling, hexagonal, Article: N0GG0
Image similar to the original Article: N0GG0, Nominal Width|5 mm, Connection| 1/8, Flow Rate|600 l/min
Nominal width 5.0 mm, material: 1.4301, single shut off, connection type: male thread DIN228/1, connection size: 1/8, seal: FPM (Viton) This one-hand coupling with automatic 5-point ball locking system with spring-loaded release sleeve. This system is used in the food industry where a mixing up of medias has to be ruled out. Achieved this is done through a coding. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Seals are FDA compliant. Material coupling: back part, sleeve, coupler body and valve stainless steel AISI 304. Seal fluororubber FPM ( FDA comliant). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainleass steel AISI 304 Nominal width 5.0 mm, 1.4301, single shut off, male thread DIN228/1, 1/8, seal: FPM (Viton)
Nominal Width: 5 mm 5 Connection: 1/8 1/8 Flow Rate: 600 l/min 600
more Details
SERIES 161.VS
coupling, protected by twisting the locking nut, hexagonal, Article: O1AE0
Image similar to the original Article: O1AE0, Nominal Width|8.5 mm, Connection| 1/4, Flow Rate|1,966 l/min
Nominal width 8.5 mm, material: steel, surface: zinc-plated, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: NBR (Perbunan) Two-hand coupling with automatic 5-point locking. Locking elements are balls that are locked by a spring-loaded unlocking sleeve. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position closes the couling and pushes the plug out of the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. The positive connection between the coupling and the plug allows to transmitted torsional forces. Coupling body, sleeve and locking nut are made from steel zink plated. Valve brass. Spring and circlip AISI 301. Balls stainless steel AISI 420. Seals made from material NBR (Buna N). Plug: steel zink plated Nominal width 8.5 mm, steel, surface: zinc-plated, single shut off, male thread DIN228/1, 1/4, seal: NBR (Perbunan)
Nominal Width: 8.5 mm 8.5 Connection: 1/4 1/4 Flow Rate: 1,966 l/min 1,966
more Details
SERIES 161.0S
plug, hexagonal, Article: OMA70
Image similar to the original Article: OMA70, Nominal Width|8.5 mm, Connection|LW9, Flow Rate|1,966 l/min
Nominal width 8.5 mm, material: steel, surface: zinc-plated, connection type: ferrule, connection size: LW9 Two-hand coupling with automatic 5-point locking. Locking elements are balls that are locked by a spring-loaded unlocking sleeve. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position closes the couling and pushes the plug out of the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. The positive connection between the coupling and the plug allows to transmitted torsional forces. Coupling body, sleeve and locking nut are made from steel zink plated. Valve brass. Spring and circlip AISI 301. Balls stainless steel AISI 420. Seals made from material NBR (Buna N). Plug: steel zink plated Nominal width 8.5 mm, steel, surface: zinc-plated, ferrule, LW9
Nominal Width: 8.5 mm 8.5 Connection: LW9 LW9 Flow Rate: 1,966 l/min 1,966
more Details
SERIES 126.V0
plug, protected by twisting the locking nut, Article: OMF62
Image similar to the original Article: OMF62, Nominal Width|7.8 mm, Connection|LW9, Flow Rate|2,030 l/min
Nominal width 7.8 mm, material: steel, surface: zinc-plated, connection type: hose connection, connection size: LW9 One-hand coupling with automatic 5-point locking. Locking elements are balls which are locked by a spring-loaded unlocking sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve moves back to its original position and closes the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 7.8 mm, steel, surface: zinc-plated, hose connection, LW9
Nominal Width: 7.8 mm 7.8 Connection: LW9 LW9 Flow Rate: 2,030 l/min 2,030
more Details
SERIES 125.F0
coupling, self venting safty coupling BiTec, Article: NB160
Image similar to the original Article: NB160, Nominal Width|7.8 mm, Connection| 1/2, Flow Rate|2,050 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN2999 (BSPT), connection size: 1/2, seal: NBR (Perbunan) Safety bleed valve meets DIN EN ISO 4414 requirements for pneumatic systems. The coupling has an ergonomic slide valve with two functions: 1. Establish flow while simultaneously securing the unlocking sleeve. 2. Shut off the flow while simultaneously venting and releasing the unlocking sleeve Coupled by pressing in the connector. Once this has audibly locked into place, the sliding sleeve can be used and the coupling can release the line pressure. Return the sliding sleeve to its starting position to switch the connector/hose connection to an unpressurised state. This will bleed any compressed air on the connector side. The connector can then be removed safely by pushing back the release sleeve. Material coupling: back part, sleeve and coupler body brass nickel plated. Sliding sleeve aluminium anodised. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel zink plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, male thread DIN2999 (BSPT), 1/2, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/2 1/2 Flow Rate: 2,050 l/min 2,050
more Details
SERIES 126.SL
coupling, protected with special plug, long version no key, Article: N90R0
Image similar to the original Article: N90R0, Nominal Width|7.8 mm, Connection| 1/4, Flow Rate|2,030 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) Two-hand coupling with automatic 5-point locking. Locking elements are balls which are locked by a spring-loaded unlocking sleeve. In order to avoid unintentional uncoupling, the unlocking process is only possible by deliberately pressing the plug into the coupling. This is the only way to free the locking elements and to move the unlocking sleeve in the direction of the connection so that the plug can be removed from the coupling. The valve moves back to its original position and closes the couling. Material Coupling: back part, sleeve, coupler body are made of brass nickel plated. Valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/4 1/4 Flow Rate: 2,030 l/min 2,030
more Details
SERIES 126.VS
coupling, protected by twisting the locking nut, hexagonal, Article: NB710
Image similar to the original Article: NB710, Nominal Width|7.8 mm, Connection| 1/4, Flow Rate|2,030 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN2999 (BSPT), connection size: 1/4, seal: NBR (Perbunan) One-hand coupling with automatic 5-point locking. Locking elements are balls that are locked by a spring-loaded unlocking sleeve. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position closes the couling and pushes the plug out of the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. The positive connection between the coupling and the plug allows to transmitted torsional forces. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, male thread DIN2999 (BSPT), 1/4, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/4 1/4 Flow Rate: 2,030 l/min 2,030
more Details
SERIES 160.VS
coupling, protected by twisting the locking nut, hexagonal, Article: O1A40
Image similar to the original Article: O1A40, Nominal Width|5 mm, Connection|LW9, Flow Rate|910 l/min
Nominal width 5.0 mm, material: steel, surface: zinc-plated, connection type: ferrule, connection size: LW9, seal: FPM (Viton) Two-hand coupling with 2-point bolt locking. Single piece coupling body with connection - ideal for absorbing significant bending and torsion forces. Positive connection between coupling and plug. Counter nut prevents the connection from being opened unintentionally. Coupling body, sleeve and locking nut are made from steel zink plated. Valve brass. Spring and circlip stainless steel AISI 301. Bolts stainless steel AISI 316. Seals made from material FPM (Viton). Plug: steel zink plated Nominal width 5.0 mm, steel, surface: zinc-plated, ferrule, LW9, seal: FPM (Viton)
Nominal Width: 5 mm 5 Connection: LW9 LW9 Flow Rate: 910 l/min 910
more Details
SERIES 090.V0
coupling, protected by twisting the locking nut, Article: N0QA0
Image similar to the original Article: N0QA0, Nominal Width|5 mm, Connection| 1/4, Flow Rate|600 l/min
Nominal width 5.0 mm, material: brass, surface: nickel plated, single shut off, connection type: male thread DIN228/1, connection size: 1/4, seal: FPM (Viton) One-hand coupling with automatic 5-point locking. Locking elements are balls which are locked by a spring-loaded unlocking sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve moves back to its original position and closes the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. Material coupling: back part, sleeve and coupler body brass nickel plated. Valve brass nickel plated. Locking nut anodised aluminium. Seal FPM ( Viton). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass nickel plated Nominal width 5.0 mm, brass, surface: nickel plated, single shut off, male thread DIN228/1, 1/4, seal: FPM (Viton)
Nominal Width: 5 mm 5 Connection: 1/4 1/4 Flow Rate: 600 l/min 600
more Details
SERIES 126.VS
coupling, protected by twisting the locking nut, hexagonal, Article: NB720
Image similar to the original Article: NB720, Nominal Width|7.8 mm, Connection|LW9, Flow Rate|2,030 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: hose connection, connection size: LW9, seal: NBR (Perbunan) One-hand coupling with automatic 5-point locking. Locking elements are balls that are locked by a spring-loaded unlocking sleeve. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position closes the couling and pushes the plug out of the coupling. All couplings in this series have an additional lock nut to secure the coupling against accidental uncoupling. The positive connection between the coupling and the plug allows to transmitted torsional forces. Material coupling: back part and body are made of brass nickel plated. Valve brass. Sleeve steel hardend nickel plated. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardend zink plated. Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, hose connection, LW9, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: LW9 LW9 Flow Rate: 2,030 l/min 2,030
more Details
SERIES 100.00
coupling, Article: N0YX1
Image similar to the original Article: N0YX1, Nominal Width|7.2 mm, Connection| 1/2, Flow Rate|1,350 l/min
Nominal width 7.2 mm, material: 1.4305, single shut off, connection type: male thread DIN228/1, connection size: 1/2, seal: FPM (Viton) One-hand coupling with 2-point bolt locking. The uncoupling process is initiated by pushing back the unlocking sleeve into the direction of the connection. The valve moves back to its original position and pushes the plug out of the coupling. Material Coupling: back part, sleeve, coupler body and valve are made of stainless steel AISI 303. Seal FPM (Viton). Spring and circlip stainless steel AISI 301. Bolt stainless steel AISI 316. Material plug: stainless steel AISI 303 Nominal width 7.2 mm, 1.4305, single shut off, male thread DIN228/1, 1/2, seal: FPM (Viton)
Nominal Width: 7.2 mm 7.2 Connection: 1/2 1/2 Flow Rate: 1,350 l/min 1,350
more Details
SERIES 090.00
plug, Article: NMAE0
Image similar to the original Article: NMAE0, Nominal Width|5 mm, Connection| 1/8, Flow Rate|600 l/min
Nominal width 5.0 mm, material: 1.4301, connection type: female thread DIN228/1 (BSP), connection size: 1/8 This one-hand coupling with automatic 5-point ball locking system with spring-loaded release sleeve. This system is used in the food industry where a mixing up of medias has to be ruled out. Achieved this is done through a coding. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Seals are FDA compliant. Material coupling: back part, sleeve, coupler body and valve stainless steel AISI 304. Seal fluororubber FPM ( FDA comliant). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 316. Material plug: stainleass steel AISI 304 Nominal width 5.0 mm, 1.4301, female thread DIN228/1 (BSP), 1/8
Nominal Width: 5 mm 5 Connection: 1/8 1/8 Flow Rate: 600 l/min 600
more Details
SERIES 160.VS
coupling, protected by twisting the locking nut, hexagonal, Article: O1A20
Image similar to the original Article: O1A20, Nominal Width|5 mm, Connection|LW9, Flow Rate|910 l/min
Nominal width 5.0 mm, material: steel, surface: zinc-plated, single shut off, connection type: ferrule, connection size: LW9, seal: FPM (Viton) Two-hand coupling with 2-point bolt locking. Single piece coupling body with connection - ideal for absorbing significant bending and torsion forces. Positive connection between coupling and plug. Counter nut prevents the connection from being opened unintentionally. Coupling body, sleeve and locking nut are made from steel zink plated. Valve brass. Spring and circlip stainless steel AISI 301. Bolts stainless steel AISI 316. Seals made from material FPM (Viton). Plug: steel zink plated Nominal width 5.0 mm, steel, surface: zinc-plated, single shut off, ferrule, LW9, seal: FPM (Viton)
Nominal Width: 5 mm 5 Connection: LW9 LW9 Flow Rate: 910 l/min 910
more Details
SERIES 090.00
coupling, Article: N0FK0
Image similar to the original Article: N0FK0, Nominal Width|5 mm, Connection|LW6, Flow Rate|600 l/min
Nominal width 5.0 mm, material: brass, single shut off, connection type: hose connection, connection size: LW6, seal: NBR (Perbunan) One-hand coupling with automatic 5-point locking. Ball locking system with spring-loaded release sleeve. Disconnect by pushing the release sleeve back into the direction of the connection. The valve will return to its starting position and pushes the plug out of the coupling. Material coupling: connection, base body, valve and sleeve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: brass. Nominal width 5.0 mm, brass, single shut off, hose connection, LW6, seal: NBR (Perbunan)
Nominal Width: 5 mm 5 Connection: LW6 LW6 Flow Rate: 600 l/min 600
more Details
SERIES 126.H0
coupling, protected with second groove, Article: N90D0
Image similar to the original Article: N90D0, Nominal Width|7.8 mm, Connection| 1/4, Flow Rate|2,030 l/min
Nominal width 7.8 mm, material: brass, surface: nickel plated, single shut off, connection type: female thread DIN228/1 (BSP), connection size: 1/4, seal: NBR (Perbunan) Two-hand coupling with automatic 5-point locking. Locking elements are balls which are locked by a spring-loaded unlocking sleeve. In order to avoid unintentional uncoupling, the unlocking process is only possible by deliberately pressing the plug into the coupling. This is the only way to free the locking elements and to move the unlocking sleeve in the direction of the connection so that the plug can be removed from the coupling. The valve moves back to its original position and closes the couling. Material coupling: back part, coupler body, sleeve brass nickel plated. Valve brass. Seal NBR (Buna N). Spring and circlip stainless steel AISI 301. Balls stainless steel AISI 420. Material plug: steel hardened zink plated. Nominal width 7.8 mm, brass, surface: nickel plated, single shut off, female thread DIN228/1 (BSP), 1/4, seal: NBR (Perbunan)
Nominal Width: 7.8 mm 7.8 Connection: 1/4 1/4 Flow Rate: 2,030 l/min 2,030
more Details